Conversion problem with oruxmapsdesktop

Hi,

I'm using a map with oziexplorer that is perfectly normal : when I load a track (file *.gpx), it matches exactly with the road. But when I convert the map with OruxMapsDesktop and I try to load the same *.gpx file in Orux on my android phone, the result is not good (there's a shift).

Here is a sample of the map file :

Code:

OziExplorer Map Data File Version 2.2
TOP25 ALLAUCH 319_419F a 100 %
1 ,Map Code,
WGS 84,WGS 84,  0.0000,  0.0000,WGS 84
Reserved 1
Reserved 2
Magnetic Variation,,,E
Map Projection,Latitude/Longitude,PolyCal,No,AutoCalOnly,No,BSBUseWPX,No
Point01,xy, 4000,    0,in, deg,  43, 20.0797,N,  5, 32.2886,E, grid,  ,          ,          ,N
Point02,xy, 4000, 4000,in, deg,  43, 14.6928,N,  5, 31.9884,E, grid,  ,          ,          ,N
Point03,xy,    0, 4000,in, deg,  43, 14.9078,N,  5, 24.6194,E, grid,  ,          ,          ,N

When I select the .map in OruxMapDesktop, an error occured that said it didn't find the .bmp, but the image is in the same directory. After this I select manualy the image file.
I've tried to select only the .bmp file and add manualy the grid coordonnates from the map file but I didn't succeed. I've put the 3 coordonnates like that :
Lat=43 20.0797 Long=5 32.2886
Lat=43, 14.6928 Long=5 31.9884
...
But OruxMapsDesktop tells me that it needs 2 coordonnates at least.

What am I doing wrong? Is it the way to indicate the grid coordonnates?

Please help me.

Fredoski wrote:Hi,

I'm using a map with oziexplorer that is perfectly normal : when I load a track (file *.gpx), it matches exactly with the road. But when I convert the map with OruxMapsDesktop and I try to load the same *.gpx file in Orux on my android phone, the result is not good (there's a shift).

When I select the .map in OruxMapDesktop, an error occured that said it didn't find the .bmp, but the image is in the same directory. After this I select manualy the image file.
I've tried to select only the .bmp file and add manualy the grid coordonnates from the map file but I didn't succeed. I've put the 3 coordonnates like that :
Lat=43 20.0797 Long=5 32.2886
Lat=43, 14.6928 Long=5 31.9884
...
But OruxMapsDesktop tells me that it needs 2 coordonnates at least.

What am I doing wrong? Is it the way to indicate the grid coordonnates?

Please help me.

Hi,

OruxMapsDesktop can not find the image; an example of a normal .map file:
OziExplorer Map Data File Version 2.2
40a_oosterbeek
40a_oosterbeek.jpg <----image file
1 ,Map Code,
Rijksdriehoeksmeting,WGS 84, 0.0000, 0.0000,WGS 84

You have to select geographical coordinates, not grid coordinates.

Send me the .map + the image (please, convert the .bmp image into .jpg, before send it to me), I will make some tests-->oruxuro@gmail.com

orux

Hi Orux, what parameters i have to put in ODConverter with this kind of map file?
best regards
richard
OziExplorer Map Data File Version 2.2
la clusaz
la clusaz.png
1 ,Map Code,
NTF France,WGS 84, 0.0000, 0.0000,WGS 84
Reserved 1
Reserved 2
Magnetic Variation,,,E
Map Projection,(II) France Zone II,PolyCal,No,AutoCalOnly,No,BSBUseWPX,No
Point01,xy, 0, 0,in, deg, , ,N, , ,E, grid, , 888000, 2120000,N
Point02,xy,16000, 0,in, deg, , ,N, , ,E, grid, , 928000, 2120000,N
Point03,xy,16000,14400,in, deg, , ,N, , ,E, grid, , 928000, 2084000,N
Point04,xy, 0,14400,in, deg, , ,N, , ,E, grid, , 888000, 2084000,N
Point05,xy, , ,in, deg, , ,N, , ,E, grid, , , ,N
Point06,xy, , ,in, deg, , ,N, , ,E, grid, , , ,N
Point07,xy, , ,in, deg, , ,N, , ,E, grid, , , ,N
Point08,xy, , ,in, deg, , ,N, , ,E, grid, , , ,N
Point09,xy, , ,in, deg, , ,N, , ,E, grid, , , ,N
Point10,xy, , ,in, deg, , ,N, , ,E, grid, , , ,N
Point11,xy, , ,in, deg, , ,N, , ,E, grid, , , ,N
Point12,xy, , ,in, deg, , ,N, , ,E, grid, , , ,N
Point13,xy, , ,in, deg, , ,N, , ,E, grid, , , ,N
Point14,xy, , ,in, deg, , ,N, , ,E, grid, , , ,N
Point15,xy, , ,in, deg, , ,N, , ,E, grid, , , ,N
Point16,xy, , ,in, deg, , ,N, , ,E, grid, , , ,N
Point17,xy, , ,in, deg, , ,N, , ,E, grid, , , ,N
Point18,xy, , ,in, deg, , ,N, , ,E, grid, , , ,N
Point19,xy, , ,in, deg, , ,N, , ,E, grid, , , ,N
Point20,xy, , ,in, deg, , ,N, , ,E, grid, , , ,N
Point21,xy, , ,in, deg, , ,N, , ,E, grid, , , ,N
Point22,xy, , ,in, deg, , ,N, , ,E, grid, , , ,N
Point23,xy, , ,in, deg, , ,N, , ,E, grid, , , ,N
Point24,xy, , ,in, deg, , ,N, , ,E, grid, , , ,N
Point25,xy, , ,in, deg, , ,N, , ,E, grid, , , ,N
Point26,xy, , ,in, deg, , ,N, , ,E, grid, , , ,N
Point27,xy, , ,in, deg, , ,N, , ,E, grid, , , ,N
Point28,xy, , ,in, deg, , ,N, , ,E, grid, , , ,N
Point29,xy, , ,in, deg, , ,N, , ,E, grid, , , ,N
Point30,xy, , ,in, deg, , ,N, , ,E, grid, , , ,N
Projection Setup,,,,,,,,,,
Map Feature = MF ; Map Comment = MC These follow if they exist
Track File = TF These follow if they exist
Moving Map Parameters = MM? These follow if they exist
MM0,Yes
MMPNUM,4
MMPXY,1,0,0
MMPXY,2,16000,0
MMPXY,3,16000,14400
MMPXY,4,0,14400
MMPLL,1, 6.057176, 46.018883
MMPLL,2, 6.572991, 46.000677
MMPLL,3, 6.548104, 45.677261
MMPLL,4, 6.035310, 45.695359
MM1B,2.500000
MOP,Map Open Position,0,0
IWH,Map Image Width/Height,16000,14400

richard wrote:Hi Orux, what parameters i have to put in ODConverter with this kind of map file?
best regards
richard

try with these:

datum --> NTF (Paris)

projection --> Lambert

PARAMETER["central_meridian",0.0],
PARAMETER["latitude_of_origin",52.0],
PARAMETER["std_parallel1",52.0],
PARAMETER["std_parallel2",52.0],
PARAMETER["scale_factor",0.99987742],
PARAMETER["false_easting",600000.0],
PARAMETER["false_northing",2200000.0],

orux

i orux, i tryed these parameters above, and it don't works, what i have to do with scale factor?
best regards
richard

richard wrote:i orux, i tryed these parameters above, and it don't works, what i have to do with scale factor?
best regards
richard

Hi;

upload the image to fileshare or similar, then send me a link; -->oruxuro@gmail.com

orux